Operating procedures of mixer’s maintenance

 

　　What’s the Operating procedures of mixer’s maintenance? Nowadays, many enterprises are using this machine, while users are usually not very clear about it and have many questions about it. The bad manner of maintenance will shorten mixer’s using life, but also result to unnecessary malfunction. Sower Group’s engineer will make a detailed analysis for you.

　　Mixer should be operated and maintained by professional staff, other staff who are not professional should not run and play mixer. Users should inspect whether there is any scraping phenomenon in the rotating part and material tank before mixing, once the scraping is found user should adjust it in time. Speed reducing tank can be used after the oil being filled in. Whether each part is fastened or not? User should clean the dirty materials inside of the tank. Before starting up the mixer, location controlling device need to be installed.

　　Before filling the materials, the mixer should be test running with no material. While the mixer is running, cut off the electricity right away once the running direction is found to be not conformed with requirement, then adjust in time. Put the materials into the tank then close it, set the time on the time plate. Mixer will stop automatically within the set time. Stop the mixer first to get the materials off, and clean the tank in time. Once the machine is running operators should be by side instead of going away.

　　Sower Group supplies customized mixer according to clients’ requirements. Sower’s professional engineers will provide first class products and technical solutions for clients with their rich experiences within chemical equipment field.

This information is for reference only!
Please contact customer service online to obtain the most accurate information. Back